Home >> Yueqing Tar Automation Equipment Co.,Ltd.
点击这里给我发消息
Products Location:Home >>Products >> Products
BV1701

product description:

   The BV1701... series electric ball valve is a self-contained, dust-proof and water-proof valve with a valve opening and closing, an operating status indicator, and a new type of product with adjustable anti-theft locking function and adjustable flow rate. Mainly used for heating heating, HVAC water system on-off control.
   The BV1701 electric ball valve consists of an electric actuator and a valve body. The actuator drives the valve body to rotate 90 degrees back and forth. The actuator adopts the brushless motor gearbox group to run the speed change. The built-in limit switch makes the valve fully open or fully shut off and the power is stable.
   BV1701 series valve body and driver can be installed separately, which greatly improves the installation efficiency and convenience; After the installation can be sealed seal, to prevent the driver to easily remove the warming behavior.
Features
   1, long service life, more than 100,000 switching times;
   2, through the flow, large flow, do not clog;
   3, good waterproof and dustproof function (IP56 protection level);
   4, The actuator can be installed after the equipment and pipeline are installed, which is more convenient to increase vigilance and installation efficiency.
   5, The valve is flexible and can effectively prevent water hammer;

   6, Sealing the lock to prevent the drive from being removed;

Technical Parameters:
  Medium: Cold/Hot Water and 60% Ethylene Glycol
  Specifications: DN15, DN20, DN25 (two-way or three-way)
  Power supply voltage: AC220V, AC24V, DC24V
  Power consumption: 2W (only when the valve is opened and closed)
  Running time: 5 seconds
  Medium temperature: 2°C-95°C (100°C-250°C can be customized)
  Close pressure difference: 0.6MPa
  Lead length: 50cm