Home >> Yueqing Tar Automation Equipment Co.,Ltd.
点击这里给我发消息
Products Location:Home >>Products >> Products
TV50 electric ball valve

product description
    TV50... series electric ball valve is a new type of product with high energy-saving power-off automatic reset (open or close after power off), anti-theft lock function, and adjustable flow rate. Mainly used for heating heating, on-off time area method, heat meter method, on-off control of HVAC system. TV50 electric ball valve consists of an electric actuator and a valve body. The actuator drives the valve body to rotate 90 degrees back and forth. The actuator uses a brushless motor to drive the gearbox group to run the speed change. The built-in limit switch can make the valve fully open or fully shut off when the power is off and the operation is stable.
    TV50 series valve body and driver can be separately installed, greatly improving the installation efficiency and convenience; after the installation can be sealed seal, to prevent the driver to easily remove the warming behavior.
    TV50 series valve body and driver can be installed at any angle, so when the valve is closed, it is completely closed. It can also solve the contradiction caused by the inconsistent initial temperature of each user's home due to the piping design problem in a residential area. Adjust the valve angle to achieve the same temperature for each household.

The main technical parameters
Medium: Cold/Hot Water and 60% Ethylene Glycol
Specifications: DN20 (two channels)
Power supply voltage: AC220V/AC110V/AC24V/DC24V/DC5V
Power consumption: 2W (only when the valve is opened and closed)
Running time: 15 seconds
Medium temperature: 2°C-95°C (100°C-250°C can be customized)
Close pressure difference 0.6MPa
Lead length: 50cm


Features

·Direct flow, large flow, no slag;
Good waterproof and anti-ash function (IP54 protection level);
· The valve is hot and cold, and the environment is cold and hot cannot be transmitted to the actuator;
· The actuator can be installed after the installation of the equipment and the pipeline, which is more conducive to increase vigilance and installation efficiency;
· Because of the eccentric structure of the actuator, the valve can be installed close to the wall;
· Remove the ball valve of the driver can be used ordinary tools switch;
· Flexible valve opening to prevent water hammer effectively;
Sealing the lock to prevent the drive from being removed;
· Power consumption: 2W when the valve is open and closed, with little power consumption;